EnglishDeutschEspagnolPortugueseFrançaise

Disinfect drinking water up to 19 liters per minutes

This UV System is a highly effective, non-chemical and environmentally friendly way of disinfecting water and ensuring safe water for the whole family. In this UV system, germicidal ultraviolet light (UV) is created by means of a special high-output UV lamp inside a quartz sleeve, placed in stainless steel housing.

As the water flows through the UV housing, it is subjected to a lethal dose of germicidal ultraviolet (UV) light that instantaneously inactivates bacteria and viruses by destroying their DNA structure and thus making the water microbiologically safe to drink.

The result is a simple, cost effective way of treating water for the entire house.

UV Systems are highly effective against water-borne bacteria like E. coli and viruses and treats water for whole-house. All the water in the house, hot & cold, is disinfected. Even water in the washrooms, kitchen and laundry.

Chemical-Free
Disinfection is achieved by a safe, natural, non-chemical process that does not alter the composition of the water or affect the taste & odour.

Compact Design
This UV System is compact and extremely easy to plumb in. For an average home, the system would be only 23� in length and 3.5� in diameter, one of the most compact UV systems in the industry.

High Output UV Lamps
All those UV systems incorporate high-output germicidal UV lamps for maximum UV energy.

Efficient Controller
The UV system is driven by a highly efficient microprocessor-controlled ballast. It
maintains UV output regardless of voltage or frequency variations. Due to it’s energy efficient design, it uses as little energy as a single light bulb.

Automatic Lamp Replacement Reminder
After one year of service, the ballast sets off an audible and visual reminder, notifying you to replace the lamp.

Easy to Maintain
Regular maintenance is extremely simple and can be performed in minutes without tools.

 

UV disinfection for small houses

  Small Home
Maximum rated flow rate 19 liters / minute
Maximum rated flow rate 1.14m³ / hour
UV Dose at rated flow 40 mJ/cm²
Total power consumption (incl. lamp) 27 Watt
Lamp power (Watts) 25 Watt
Lamp Service life 9000 hours
Annual Lamp Change Timer yes
Lamp-On Indicator yes
Lamp-Failure Audible/Visual Indicator yes
Lamp Change Grace Period 28 days maximum
Grace Period Audio Alarm Disable yes (7 days increments)
Reactor Chamber material Stainless steel 304
UV Monitor Yes (Model R519M)
Solenoid Output (12 V DC) No
Flow restrictor Optional Model FR5K
Inlet/Outlet Port Size 3/4" MNPT
Maximum Operating Pressure 100psi
Maximum Ambient Temperature 50°C
Water temperature Range 4-37°C

For optimum performance of the system, water entering the UV System should meet the following parameters: Hardness < 7.0 gpg (120 ppm); Iron < 0.3 ppm; Manganese < 0.05 ppm; Turbidity < 1 NTU; Tannins/Colour: None; UV Transmissivity > 85%

TYPICAL INSTALLATION
UV Systems are installed as the final stage of treatment, after softeners, iron filters or sediment filters, just before the plumbing line divides into hot and cold lines.

WARRANTY
Following are the warranties against defects in materials &/or worksmanship.
7 Years – Stainless steel chamber
1 Year - Miscellaneous hardware, seals and ballast.
6 months – UV lamp.

Corporate News

On Wednesday 2 May 2012 DWC was part of the morning show in the BBC Radio 4 program. We have... [more]
 
This years IFAT www.ifat.de will be very exciting - again. Our friends and partners in the industry... [more]
 

Market News

The latest report by the Arab Forum for Environment and Development (AFED), “The Green Economy in a... [more]
 
The UN warns that a million children in Africa's Sahel region face malnutrition due to drought in... [more]
 

Products News

Incredible, we know LED shower heads indicating water temperature. This new development from... [more]
 
A new, ultra low energy consuming water desalination system has successfully passed the lab tests.... [more]