Seawater desalination System SS 100 / SB 002
The renewable powered desalination system SS 100 is a mobile, compact and completely self-sufficient appliance and included the complete power production pack with wind, PV and batteries. It can produce approximately 3,500 litres of drinking water every day.
The core part of the system is a reverse osmosis system with unparalleled efficiency and a propriatory pressure recovery system. Despite the high technical requirements on the appliance, the system is simple to operate and is impressive in its ease of use.
The system is very quick to construct, consists of various modular building blocks and is, among other uses, completely suitable for use in sunny countries or during natural catastrophes. However, even small hotels on the sea, or drinking water production from saline sources are among the typical areas for its application.
The system (Version SS 100) is supplied with the complete power pack (wind generator...), which additionally provides the energy required.
The desalination unit (SB 002) is also available without the energy components if local energy is provided.
Technical specification
Raw water source: Sea water, anorganic contamination up to TDS 40,000 mg/l
Size of removed particles: Demineralisation
Quality of produced water: Demineralized
Application / Installation: Local installation / Decentralized
Appliance design: anodized aluminum and chrome steel
Intake pump 1 piece max. 1000 l/h / 6 bar pressure
Tube packet 20m
Motorized back wash pump 1 piece 100 Microns
Motorized back wash pump 2 pieces 25 Microns
Desalting system 3 x RO (pressure recovery included)
Activated carbon filter 1 piece 20 Microns
Energy consumption: 650 W/h (unit)
Energy consumption: 900 W/h (incl. borehole pump)
Capacity: 160 - 290 l/h (depending on raw water)
Weight: 450 kg
External dimensions: 1600 x 900 x 1150 mm
Version E (incl PV, Wind and Battery components)
Bergey Wind turbine 1 piece max. 1000 W/h
Solar cells 6 pieces max. 1240 W/h
VRLA Maintenance free batteries 4 pieces 12 V - 200 AH/Battery Weight net 1400 kg
External dimensions 1700 x 1500 x 1500 mm
Exclusive pressure recovery system
- Exclusive two stage intensifier system: It reduces energy consumption by as much as 75% over conventional systems. Units are constructed of modern composites and engineered plastics to deliver many years of quiet, reliable service. Tens of thousands of hours of field experience and a worldwide service network proves its practical functionality.
Different applications/configurations in different countries
Water purification from any salt water source or any contaminated sweet water sources like rivers, lakes or ponds for the drinking water supply of military camps.
Drinking water production for civil applications
Any water source from any existing salt or sweet water well is suited in producing drinking water from Photovoltaic and / or Wind power. Here are pictures from Mauretania
Even drinking water production at golf courses is technically not a problem anymore.
Here are pictures for drinking water production supplying complete villages in remote areas in Venezuela based on renewable energies only.
University level in Pakistan or directly at the road for the public use
Water purification at university level in Pakistan, directly at the road for the public use or at the entry of housings for the habitants to fetch drinking water.
Solar powered desalination system in the harbour of Dubai
The sea water has a salt content of up to 40,000 TDS - the unit produces drinking water quality tested by an independent water laboratory.
Treating brackish water from borehole in Australia
A solar powered brackish water system provides drinking water for visitors. The solar tracking system follows the sun in 12 steps. Up to 30 % more power is achieved. The unit treats brackish borehole water into drinking quality.
