Water desinfection between 20 - 50m³ per hour
This type of UV desinfection is operated with 230 Volt AC. Always two different versions are available with exactly the same technical specifications.
The only difference is in the reactor material: Either V4A stainless steel for drinking water purposes or V2A stainless steel for non potable use like pools, ponds etc.
The details are as follows:
DWC Pure 2.2 - 75 (V2A steel) / DWC Pure 2.4 - 75 (V4A steel)
| Type | Pure 2.2 - 75 / Pure 2.4 - 75 |
| Flow rate (m³h) | 20 - 50 |
| Temperature max °C | 40 |
| Operating pressure (max) | 6 bar |
| Reactor number | 1 |
| Material | Stainless steel V2A / V4A |
| Diameter (mm) | 76 |
| Length (mm) | 990 |
| Connections | 3 x 2" |
| Surface | Electro polished |
| Insulation | FPM |
| Electronic control | |
| Type | electronic |
| Housing material | Aluminium (heat optimized) |
| Protection | IP 65 |
| Dimension (mm) | 262 x 127 x 91 |
| UVC Lamp | |
| Quantitiy | 1 |
| Electrical power (W) | 75 |
| Operation (h) | 8000 - 9000 |
| Electrical connection | |
| Voltage | 230 V AC |
| Frequency (Hz) | 50 |
| Power Consumption | 75 W |
| Fuse (A) | 10 |
| Weight (net) kg | 7.5 |
All Systems from DWC Pure 2.2 or DWC Pure 2.4 have identical geometry so that any UV upgrade or downgrade can be made easily, control includes status mode with LED and visual display with glass, includes: security switch, 2 PVC joints, 63mm glued holders 2� inner threads, wall mounting ; flexible through 3 connections, plug and play, made in Germany.
The only difference between Pure 2.2 (ponds) and Pure 2.4 (drinking water purposes) is its stainless steel grade of the reactor material.
For drinking water purpose the higher stainless steel grade called 1,4571 V4A is recommended.
For UV desinfection as used in ponds, pools, etc stainless steel 1,4301 V2A is usually sufficient.
